Skip to content

Power float hire in Sejny

A floor in a garage, outbuilding or cowshed should be level, hard and dust-free. Hand-finishing a large area of concrete is practically impossible in the time the concrete allows. A power float with rotating blades smooths and compacts the top layer of concrete before it sets.

Call: +48 516 441 111 Send an enquiryMon–Fri 7–16 · Sat 7–13

Uses

What it is used for

  • Smoothing concrete floors in garages and outbuildings.
  • Finishing concrete slabs in halls and warehouses.
  • Hardening the concrete surface with a dry-shake hardener.

In practice

How to use it to get a good result

  • Start floating when the concrete is firm enough for a boot to leave a print a few millimetres deep — usually a few hours after pouring, depending on the temperature.
  • Work with the blades flat first, and only increase their angle for finishing.
  • Book the machine for the day of the pour — the float must be on site before the concrete starts to set.
  • Corners and edges along the walls are finished by hand with a trowel.
  • After floating, protect the floor from drying too fast — cover it with sheeting or keep it damp for the first few days.

Before collection

What to prepare

  • A trailer or van — a petrol power float is heavy and awkward.
  • Fuel for the engine and a fixed delivery time for the concrete, so the machine is on site before pouring.
  • Hand trowels for corners and edges along the walls.
  • Wellingtons and a second person — floating a large slab is several hours of non-stop work.

FAQ

Questions: petrol power float

Cannot find your answer here? Call: +48 516 441 111.

When should I start floating the concrete?

When the concrete holds a person’s weight and leaves only a shallow print. In hot weather this happens sooner, in cool weather even several hours later. That is why the daily rate (PLN 150 net) is usually taken for a power float rather than the hourly one.

Is a power float suitable for a screed in a house?

Thin residential screeds are usually finished with other techniques. A power float is meant for concrete floors over larger areas.

Can I smooth old concrete with a power float?

No. A power float works on fresh, setting concrete. An old floor is levelled by grinding or with a self-levelling compound — ask us what will work in your case.

Tool hire

Other equipment to hire

  • Plate compactor

    Driveways, block paving, sub-base

    Four weights to choose from: 100, 150, 300 and 400 kg.

    from 30 PLN/h · 100 PLN/day (net prices)

  • Trench rammer (vibratory tamper)

    Narrow trenches, backfill along walls

    Vibratory tamper with extension.

    40 PLN/h · 150 PLN/day (net prices)

  • Demolition hammers and drills

    Breaking out, demolition, drilling

    Bosch impact hammer plus lighter demolition hammers and drills.

    from 30 PLN/h · 80 PLN/day (net prices)

  • Alligator saw

    Cutting aerated concrete and blocks

    Saw for aerated concrete blocks and hollow blocks.

    40 PLN/h · 150 PLN/day (net prices)

  • Concrete floor scarifier

    Milling and levelling concrete floors

    Machine for removing the top layer of concrete and old adhesive; disc wear charged separately.

    20 PLN/h · 80 PLN/day (net prices)

  • Concrete mixer

    Concrete and mortar on site

    Mixer for concrete and mortar.

    30 PLN/h · 100 PLN/day (net prices)

  • Rotavator

    Loosening soil for lawns and gardens

    Petrol garden rotavator.

    40 PLN/h · 150 PLN/day (net prices)

  • Earth auger

    Holes for posts and planting

    Auger for drilling holes in the ground.

    40 PLN/h · 80 PLN/day (net prices)

  • Optical level

    Levels for foundations and ground

    Level for setting out heights on site.

    30 PLN/h · 80 PLN/day (net prices)

  • Cross line laser

    Levels and plumb lines indoors

    Laser projecting a horizontal and a vertical line.

    20 PLN/h · 50 PLN/day (net prices)

  • Door frame fitting kit

    Setting interior door frames

    Set of braces for holding a door frame in the opening.

    20 PLN/h · 50 PLN/day (net prices)

  • Generator 10 kW

    Sites without mains power

    Output 10 kW.

    40 PLN/h · 150 PLN/day (net prices)

  • Space heater

    Heating a site and drying

    Heaters for heating rooms on a building site.

    10 PLN/h · 30 PLN/day (net prices)

  • Dedra construction dehumidifier

    Drying plaster and screeds

    Dedra dehumidifier.

    40 PLN/h · 150 PLN/day (net prices)

How tool hire works

Location

Welcome to the store

Opening hours
Monday–Friday07:00 – 16:00
Saturday07:00 – 13:00
Sundayclosed
Open in Google Maps

Enquiry

Ask about products

Tell us what you need — we will reply with a price and availability.

In a hurry? Call: +48 516 441 111

* required fields