Skip to content

Trench rammer (vibratory tamper) hire in Sejny

A plate compactor will not fit in a trench for a drain pipe or in a narrow strip of backfill along a foundation wall. For places like these you use a trench rammer, or vibratory tamper — a small foot that packs the ground with vertical blows. It also copes well with clay soils, which a vibrating plate cannot compact properly.

Call: +48 516 441 111 Send an enquiryMon–Fri 7–16 · Sat 7–13

Uses

What it is used for

  • Compacting backfill in narrow trenches for pipes and cables.
  • Compacting soil along foundation walls, in corners and around manholes.
  • Compacting cohesive soils — clay and silt — layer by layer.
  • Work on water and sewer connections on your property.

In practice

How to use it to get a good result

  • Backfill in layers no thicker than 10–15 cm and compact each one separately. A thick layer only gets compacted on top.
  • Above pipes, compact the first layer of backfill carefully and at the sides, not directly over the pipe — the blows can damage it.
  • The rammer moves forward by itself; guide it, do not push it. Hold the handle firmly with both hands.
  • Clay must have the right moisture: too wet and it smears under the foot, too dry and it breaks into lumps.

Before collection

What to prepare

  • A trailer or van for transport and a second person for loading.
  • The trench with backfill ready on site — soil or sand to hand next to it.
  • Ear defenders, gloves and safety boots.
  • The width and depth of the trench, so we can show you how to lower the machine into it safely.

For a large, open area under paving or a driveway, a plate compactor will be faster. Plate compactor

FAQ

Questions: trench rammer (vibratory tamper)

Cannot find your answer here? Call: +48 516 441 111.

How is a trench rammer different from a plate compactor?

A rammer has a small foot and packs the ground with blows, so it fits in narrow trenches and compacts clay better. A plate compactor has a wide plate and covers large, flat areas of aggregate and sand faster.

How much does it cost to hire a trench rammer?

The rammer with extension costs PLN 40 net per hour or PLN 150 net per day (24 hours).

Can I compact the bedding under paving with a rammer?

You can, but on a large area it takes many hours. A plate compactor is more practical for paving — keep the rammer for corners and edges along the kerbs.

Tool hire

Other equipment to hire

  • Plate compactor

    Driveways, block paving, sub-base

    Four weights to choose from: 100, 150, 300 and 400 kg.

    from 30 PLN/h · 100 PLN/day (net prices)

  • Demolition hammers and drills

    Breaking out, demolition, drilling

    Bosch impact hammer plus lighter demolition hammers and drills.

    from 30 PLN/h · 80 PLN/day (net prices)

  • Alligator saw

    Cutting aerated concrete and blocks

    Saw for aerated concrete blocks and hollow blocks.

    40 PLN/h · 150 PLN/day (net prices)

  • Concrete floor scarifier

    Milling and levelling concrete floors

    Machine for removing the top layer of concrete and old adhesive; disc wear charged separately.

    20 PLN/h · 80 PLN/day (net prices)

  • Concrete mixer

    Concrete and mortar on site

    Mixer for concrete and mortar.

    30 PLN/h · 100 PLN/day (net prices)

  • Petrol power float

    Concrete floors

    Petrol engine.

    40 PLN/h · 150 PLN/day (net prices)

  • Rotavator

    Loosening soil for lawns and gardens

    Petrol garden rotavator.

    40 PLN/h · 150 PLN/day (net prices)

  • Earth auger

    Holes for posts and planting

    Auger for drilling holes in the ground.

    40 PLN/h · 80 PLN/day (net prices)

  • Optical level

    Levels for foundations and ground

    Level for setting out heights on site.

    30 PLN/h · 80 PLN/day (net prices)

  • Cross line laser

    Levels and plumb lines indoors

    Laser projecting a horizontal and a vertical line.

    20 PLN/h · 50 PLN/day (net prices)

  • Door frame fitting kit

    Setting interior door frames

    Set of braces for holding a door frame in the opening.

    20 PLN/h · 50 PLN/day (net prices)

  • Generator 10 kW

    Sites without mains power

    Output 10 kW.

    40 PLN/h · 150 PLN/day (net prices)

  • Space heater

    Heating a site and drying

    Heaters for heating rooms on a building site.

    10 PLN/h · 30 PLN/day (net prices)

  • Dedra construction dehumidifier

    Drying plaster and screeds

    Dedra dehumidifier.

    40 PLN/h · 150 PLN/day (net prices)

How tool hire works

Location

Welcome to the store

Opening hours
Monday–Friday07:00 – 16:00
Saturday07:00 – 13:00
Sundayclosed
Open in Google Maps

Enquiry

Ask about products

Tell us what you need — we will reply with a price and availability.

In a hurry? Call: +48 516 441 111

* required fields